Polishing wax stainless steel sculpture

How to use a buffing wheel and polishing wax stainless steel sculpture ?
Stainless steel sculpture polishing wheel rotation direction toward the operator, and has enough speed. Polishing wax gently against the wheel edge, and to ensure that the rotating shaft water
Below the plane, until the surface is completely covered by a polishing wax. Gently leaning against the polishing wheel with a clean piece of metal surface for a few seconds, so the wax expand. Repeated several times, so that the wax
Uniform coverage on the surface of the metal member. When the surface is completely covered with a wax, it can for polishing step. If necessary, then cover polishing wax wheel (preferably erase round
Remnants of wax on the sub and then painted). Used for coarse grinding in the mill (cutting mill), fine grinding (polish) wheels should be separated, but be sure to separate, or glazing process
The coarse particles can scratch the surface of the metal member.
 The Future Bright Sculpture Art Co., Ltd., is set sculpture project design, fabrication and installation of the sculpture in one engineering company, skilled, strong, rich practical experience of the sculpture project. Kai King Sculpture Center as the main large-scale sculpture of stainless steel, various stainless steel sculpture, bronze sculpture, wrought copper sculpture, glass and steel sculpture, stone carving, color music fountain, is a strength of the production and operation of enterprises.