The best solution to the conservation of stone

The reason for doing high-end stone building stone decorating a large extent is the use of its excellent physical properties, especially its rich color, it is unmatched by other materials. But this gloss and more easy in use slowly disappearing, so understanding the formation of stone color theory, the stone conservation is important to maintain the natural color of stone tools.
Not yet installed or newly installed stone stone disease prevention protection. The main symptoms are: water spots quit, salt efflorescence, rust vomiting yellow, frost damage, surface corrosion, pigment pollution. This situation can be targeted from the following aspects of the treatment, first, the structure of the stone structure and chemical composition caused by the change; the second is the stone used in the installation and Construction Stone technology and environmental factors. In all cases, the fundamental reason is because of natural stone with its cracks and pores caused by absorption and permeability, the solution should use repellant treatment, reduce the water absorption and absorption. Avoid water, pollutants into the stone house, so no way to produce disease. We have a wealth of practical experience and the introduction of a variety of fine domestic and international protection products (including solvent, water formulations, credit to resin type, strong penetration type, acid type, etc.) for different stones of different chemical structure, different water absorption, different installation way, the different installation places strict, affordable, effective solutions and daily care programs, to do better we pursued the dream and goal.
The formation of Cube Stone color theory and solutions
Because the color is natural stone formation, the quality is good or bad color pigment contained by the stone structure of ions and the internal decision. Meanwhile, the composition of stone formed by the sequence of different minerals also affect the color change in different, this is the color. Therefore, the use of decorative stone color differences often encounter the problem. According to the stone structure and color characteristics of different phenomena will have color facing stones broadly grouped into two categories, and propose different solutions:
1, the same color of the stone
The color of the stone is the same with the same structure and characteristics, and the color composition of a class of the same or similar stone. For example: Shandong white flowers and the large flowers, the flowers and flower, smooth and rough surface, the new surface and the old surface and the upper and lower ore bed are all the same color of the stone. For this type of stone the color difference between the proposed use of enriched-type stone curing agent (also known as wet color agent, preservative) for processing. Hyperchromic type of stone conservation agent for the same color stone color difference between the minor adjustments and frayed, faded, faint phenomena such as marble, granite, sandstone, slate and other types of respiratory pores in the dark stone of the hyperchromic treatment. Hyperchromic effect on the light-colored stone is not obvious. After the elegance is not easy to fade, therefore, recommend a sample test, recognition results after bigger area of ​​construction.
2, the different color of stone
Different color of the stone is a completely different structure and characteristics, and the color is completely different or very different components of a class of stone. For example: gold, beige and New West yellow, beige and white sand beige Spain, Shandong white hemp with the United States between the gray color of the stone are all different. For the color difference between them is recommended coloring (dyeing) for processing.
At present, domestic and foreign colored stone about twenty several ways, most of them require specific equipment or venues. This stone care industry is not very realistic. Dye used for coloring stone treatment is a simple and convenient and a good way to effect significant. However, once the stone is not easy to remove after coloring, therefore, recommended that the construction of professional and technical personnel in order to avoid unnecessary losses.
Yan stone by stone type of curing agent to represent the natural luster
Stone the species, different construction techniques, aesthetic level of the finished product varies, and some light colored, some are a little Jackson paid; some of dyed stone in a long time after use, the original will gradually lose the effect of dyeing, the original bright beautiful appearance will seem bleak. Slate, rubble, mushroom, etc. Most have not been polished stone will appear above the flaw, not only affect the decorative effect, but also because without the polished surface, strong water absorption, easy to produce stone common problem.
Silicone-based material used by the type of stone care products Yan to handle such a situation, the treated stone beautiful bright colors, but also with a waterproof, anti-pollution effect and the ability to maintain long-term stability of beautiful stone.
At the same time for hair coloring treatment stone stone surface (such as cultural stone) fire board matte surface and rough stone, including slate color treatment to enhance and maintain the role of color and texture, can be bonded in the interior and exterior stone, and produce a layer of transparent, matte coating from the maximum protective effect. Fees Negotiable.
Stone stone brightening treatment for enhanced luster, used to protect the table walls, stone surface polishing cloth after the software to generate a fixed protective layer, and represent the natural luster.
Substantial increase in stone stone surface gloss brightener
"Stone surface brightener" directly on the stone surface by hand brushing, spraying, and with mechanical polishing, grinding stick handling, the construction process is very simple. "Stone surface brightener" has a strong permeability and bonding strength, can form a hard stone surface crystalline layer, so that the stone surface gloss, wear resistance, anti-fouling performance improved significantly. The deal applies to all kinds of marble calcium carbonate, such as beige, black and white roots. Of course, a massive stone conservation also need to deal with a variety of ways.
Brightener stone surface characteristics:
1, the stone surface with excellent corrosion resistance.
2, the stone surface of the white crystalline objects can not easily maintain the flow of liquid.
3, treated the stone does not change the color or minor change.
Brightener stone surface construction method:
Surface treatment: construction of the stone surface must be clean and no water, no stone protector, no oil, and other attachments, otherwise the effect will be less than ideal.
Dry Stone: can be applied to wet the stone surface is dry, it should be dry and the surface as far as possible in order to achieve the best results.
Specific process: brush with a plastic watering can or oil onto the stone surface brightener, about 10 minutes until washed away with water; If you want to use a dry cloth to wipe better and repeat the operation.
Maintenance and bring honor to the late: Wash with water and wipe the surface with a dry cloth remnants, painted on the curing agent can achieve the effect of increasing light.
Stone surface brightener Construction Notes:
1, when the construction with rubber gloves and masks, splashed on the skin on the body and pharmaceutical clean water as soon as possible.
2, must be well ventilated area construction, do not bother to smell with the nose rising mist of gas, otherwise it will hurt the body.
Using the above curing agent on the stone, allowing the stone look like new. But in everyday life, we should pay attention to the conservation of stone, the stone used to make more long-term. Regularly clean and maintain and regularly clean the surface of stone conservation, maintenance of the stone surface has Woon as new. Try to avoid direct contact with acid chemicals stone surface, so as not to cause a chemical reaction, resulting in color differences or affect the quality of stone. Nailed soles as much as possible to avoid direct, frequent friction surface, resulting in dull stone surface roughness.