How to maintain stone

Not touch the non-neutral items, all are afraid of acid-base stone. For example: often caused by acid pyrite granite vomiting yellow matter from oxidation and the phenomenon of acid will break down the calcium carbonate contained in the marble, causing the surface to be erosion, alkali feldspar also eroded granite and Quartz Stone in the silicified Crystallization of the grain boundary caused the spalling. Therefore, destruction of non-neutral item was a mirror of the original stone fierce.
Waxing is not free. All types of wax on the market more than a water-based wax, stearic acid wax, wax oil, acrylic wax and so on. These are basically wax material containing acid and alkali. Not only will plug the pores of stone breath, but also the formation of wax coated with dust and dirt contamination, resulting in the phenomenon of the yellow stone surface. However, if the flow of pedestrians and goods, the place to be on the high frequency of wax, then consult a professional maintenance company to guide the use of wax and maintenance.
Not indiscriminate use of non-neutral detergent. For the sake of fast cleaning, general cleaning agents contain acid-base properties, it is unknown if prolonged use of detergent ingredients, will make the stone surface luster lost, and because of the residual non-neutral agent is the main cause of stone disease in the future produce .
Long-term coverage is not carpet, debris. In order to maintain smooth breathing stone, should avoid carpet in the stone and debris covering the surface of the long-term, otherwise stone stone pores under the moisture can not evaporate. The stone due to excessive moisture, water content increased annoying stone disease arising from issues such as you must carpeting, piled debris, please do not forget to always change.
To thoroughly clean clean. Whether in hard granite texture (hardness HRs88-111 ± 4-7) or the soft texture of the marble (hardness HRs46-77 ± 3-5) are intolerant wind and sand and soil particles in the long-term devastation. Therefore, when the use of either electrostatic precipitator and dust mop thoroughly and cleaning work to do. Entry into the commercial space dust is best to place the pad, had brought the shoes involved in the sand filter is best started after the change into slippers home and reduce dust and sand the surface of the opportunity to wear the stone.
To regular maintenance, maintenance gloss. Dust alone, cleaning can not be sustained to maintain the brilliant luster of stone refundable. Therefore, please be sure to regularly send professional companies to do maintenance and regeneration of gloss maintenance, such as: use of crystal liquid to the marble surface recrystallization, or use polishing powder for marble or granite surface regeneration gloss, or use polishing powder for marble or flowers regeneration gloss stone surface, or use the permeability of the protective agent such as gloss. Holding on to your stone can be as good as new.
To immediately clear the pollution. All stones are pores with a natural, pollution (oil, tea, coffee, cola, soy sauce, ink, etc.) can easily penetrate into the stone house along the pores, the formation of unwanted stains, so be sure to select the good quality of stone facilities for special protective agent to prevent pollution source pollution in Stone Stone. Impossible to know all the protectants are long-term denial of pollution hundred percent, so once back in the stone on the pollution sources must be immediately clear, to prevent infiltration of the pores within the stone.
To always maintain a dry and ventilated. Fear of too much humidity stone. Stone will produce water vapor hydration, hydrolysis and carbonate effects, resulting in water spots, bleaching, weathering, erosion, rust, yellow and other diseases, destroy the stone. Therefore, installation of a stone to be always kept dry and ventilated.
Applied for protection to deal with on a regular basis. Long life to protect the stone, blocking the penetration of water and pollution, must be on a regular basis (as the best quality of stone types and Protectant is a 1 - 3 years to do 1 - 2 in this treatment) facilities for protective treatment.
Protective agent must pay special attention to quality. After applications must be able to maintain the stone's breathability and water resistance, stain resistance. Protective agent of unknown origin must not be used to avoid not only reach the protective effect, but increased the stone maintenance problems.