Stone finishes can be divided into ten areas

As a decorative stone, people not only from its color, pattern, etc. to achieve the purpose of decoration, but also from the effect of stone finishes to achieve the purpose of decoration, its stone company finishes can be divided into the following ten areas
    1, polished surface:. The plates for coarse grinding with abrasive, grinding, grinding, and polishing them powder, polishing agent to be processed from the finish. The surface bright as a mirror, brightly colored, pores are few and small.
    2, matt surface: coarse abrasive will be flat, finely ground processed, its brightness and color finishes are less than the polished surface. The relatively smooth surface, porous. This texture finishes commonly used in public places. Its surface than the polished surface of the color light.
    3, polished surface: coarse abrasive will be processed from the plate, its brightness and color finishes are lower than the matt surface. The relatively smooth surface, porous. This texture finishes are commonly used in public places. Its surface color of light than the matt surface.
    4, cutting surfaces: directly processed with a saw, a matte surface color is a light, showing saw marks. The main requirements of a rough surface for some decorative finishes.
    5, fire surface: a mixture of acetylene and oxygen gas jet burning Building Stone plate surface, the surface layer of the burst, the uneven surface finishes. Its surface color is a light, porous, water absorption.
    6, Gouge surface: steel Gouge pound stone surface texture obtained by point-like finish (also known as litchi surface of this surface) or strip texture finishes. The rough texture of the density and degree of choice. Surface color is a light, large pores, high water absorption than the surface fire.
    7, ax chop side: use ax blow pound striped stone surface finishes available. The rough texture of the density and degree of choice. Surface color is a light, large pores, water absorption is very large.
    8, sandblasted surface: high-pressure water flow of sand and stone surface and the formation of rough surface, the surface is a light color, uniform texture, but the larger pores, high water absorption.
    9, mushrooms face: the use of steel chisel or ax hit the pound mushroom-shaped stone surface to obtain surface, its texture is very rough, the surface color than the dark, large pores, water absorption is also large.
    10, hit wedge surface: Slate's playing in the manual or mechanical wedge processing, the board received a natural stone slightly rough texture finishes. Its surface color darker, the pores small, small water absorption.
Meet us at STONEXPO 2008
Marble Countertop Maintenance