Stone maintenance all kinds of solid color method

Abstract: the advantages: wax solid color of the method is simple, and also can increase gloss of stone material. Advantages: solid color effect is good, clean water also not easy decoloring; Can obviously increase gloss of Stone Blocks material. (2) the solid color effect is good, hard to wipe not rub off; Crystal glaze itself discoloration and contains ultraviolet ray absorber, up the color effect, can prolong dyeing of stone material show color time.
1, wax
Advantages: wax solid color of the method is simple, and also can increase gloss of stone material.
Faults:
(1) the result is bad, solid color cloth or paper and wipe brush forcibly can rub out the color, solid color not lasting.
(2) the Stone Measure Tools material of stone material wax is itself a damage, because solid containing wax group, ultraviolet light color role will change color, often is the color burn, the influence of material of stone of light color appearance, and wax will adsorption other form a composite dirt, the dirt in the stone material of capillary word fill dirt is difficult to use the conventional method be cleared.
(3) wax will increase the stone surface smooth degree, increase the risk of pedestrians slip.
(4) pigment and dye on human body and the influence of the environment is very complicated, easy to rub off stone owner had better or careful with.
2, the film
Methods: the method of film has two kinds, one kind is again after dyeing film closed; Another kind is pigments and resin after blending together in stone material surface into film.
Advantages: solid color effect is good, clean water also not easy decoloring; Can obviously increase gloss of stone material.
Faults:
(1) the resins low hardness, low wear resistance, easy appear scratching the surface and affect the appearance.
(2) resin itself also easy to change color, and even uneven color.
(3) resin will aging and fall off, to remove the pollution of stone material resin itself is a very difficult.
(4) with resin sealing stone will affect the stone material 'breathing' role, may cause some lesions occur stone material.
3, crystal glaze solid color
Methods: stone after dyeing, wipe the surface of the remaining pigment, plus crystal glaze and polishing.
Advantages:
(1) crystal glaze high hardness, wear resistance, good effect, after processing is ideal lens face, have the effect of the crystal bright, was found no cast mark, on the exterior has a natural stone material, high-grade stone visual effect.
(2) the solid color effect is good, hard to wipe not rub off; Crystal glaze itself discoloration and contains ultraviolet ray absorber, up the color effect, can prolong dyeing of stone material show color time.
(3), good effect, add gloss can reach 90 ~ 100 readings.
(4) the processed stone faces have prevent slippery and antifouling effect, increase the stone material of additional functions.
⑸ pure water products, avirulent insipidity, green environmental protection.
Faults: a processing costs higher than wax.
Marble, granite business coming to Paris
French tiles challenge Chinese market