Stone is often used for fireplaces, hearths, and accent walls in the home. Stone fireplaces will be easier to clean if you apply a finish of penetrating sealer which contains tung oil. This is moisture resistant and forms a coating tough enough to wash with soap and water.
Brush stone occasionally to remove dust and "freshen" stone or dust with dusting attachment of vacuum cleaner. To remove soot, dissolve 4 ounces of yellow laundry soap in boiling water. After the mixture has cooled, add 1/2 pound of powdered pumice and 1/2 cup of household ammonia. Mix thoroughly. Use a stiff brush to remove as much soot as possible. Then using a paint brush to paint stones with the soap mixture, let remain 1/2 hour and clean with a stiff brush and warm water. Rinse thoroughly with warm water.
For normal cleaning wash stone with detergent or soap, using a mild abrasive if necessary. Rinse and wipe dry. For added beauty, rub dry slate with a soft cloth dipped in lemon oil furniture polish. Using a fresh cloth, wipe off excess oil and buff the stone. This makes stone uniformly dark and glossy. Do not use wax on fireplaces as it is affected by heat.
For grease stains on stone grills, dissolve 8 tablespoons (1/2 cup) Tri-sodium Phosphate (TSP) in 1 gallon of hot water. Wearing rubber gloves and with a stiff scrub brush, scrub stone surface. Rinse with plenty of warm water. Repeat if soot or greasy stain is not removed. More TSP may be added if necessary, up to 1 cup per gallon. Since this is a very strong solution; avoid getting on skin, carpet, or fabrics.
没有评论:
发表评论